Ultraflex LHT SG is a standard-grade, non-sag, nonslump, polymer-modified,
large-and-heavy-tile mortar and thin-set mortar for interior/exterior installations
on floors, walls and countertops. It is used to install large-format and heavy tile/
stone, including porcelain tile, heavy-ribbed-back tile, brick pavers, dimensional
tile and natural-stone tile. Ultraflex LHT SG is designed for use at 3/32″ to 1/2″
(2.5 to 12 mm) thickness to give better support under large-format tile. This
mortar is formulated with Easy Glide Technologyâ„¢ for ease of application and
good adhesion to the substrate and tile.
Features And Benefits
• Nonslump for large-format and heavy tile/stone in floor applications
• Non-sag for large-format and heavy tile and stone in wall applications
• For thicker bond coats from 3/32″ to 1/2″ (2.5 to 12 mm)
• Smooth and creamy consistency for easy application
• Polymer-enriched for good performance
INDUSTRY STANDARDS AND APPROVALS
• ISO 13007: When mixed with water, classification C2TE; when mixed with
Keraply, classification C2ES1
• ANSI: Exceeds ANSI A118.4HTE when mixed with water, and ANSI A118.11
when mixed with undiluted Keraply
Features and Benefits
- Non-slump for large-format and heavy tile/stone in floor applications
- Non-sag for large-format and heavy tile and stone in wall applications
- For thicker bond coats from 3/32″ to 1/2″ (2.5 to 12 mm)
- Smooth and creamy consistency for easy application
- Polymer-enriched for good performance